2017年3月26日星期日

What is the use of a knock sensor on a car engine?



The burning of the engine is very complicated, so the need for a very accurate design and control, a little control errors or disorders, it will cause abnormal combustion, and "knock" is an abnormal combustion. Simply put, the knock is not normal combustion caused by the pressure inside the combustion chamber.

When the engine is working due to excessive ignition time (ignition advance angle), the engine load, temperature and fuel quality and other effects, will cause the engine knock. In the event of knocking, due to gas combustion before the piston moves to the top dead center, the light produces noise and reduces the power of the engine, which can damage the mechanical parts of the engine. In order to prevent the occurrence of knock, china knock sensor is an indispensable important parts, in order to adjust the ignition through the electronic control system ahead of time.

Because the engine there is knocking phenomenon, so there will be a knock sensor, china knock sensor installed in the middle of the engine cylinder to four-cylinder machine as an example installed in the 2 and 3 cylinder, or 1, 2 cylinder in the middle of a , 4 in the middle of a cylinder. Its role is used to determine the engine jitter, when the engine knock, the china knock sensor to the engine's mechanical vibration into a signal voltage sent to the ECU. ECU in accordance with its internal storage in advance of the ignition and other data, timely calculation of modified ignition advance angle, to adjust the ignition time to prevent the occurrence of knock.

Low-grade fuel, ignition too early and other causes of engine knock can cause engine damage. The effect of the knock sensor is to transmit the engine knock in the form of an electrical signal to the electronic control module as an important basis for the control module to adjust the ignition timing to prevent further knocking. The knock sensors are generally of the piezoelectric ceramic type, and when the engine has jitter, the ceramic inside is squeezed to produce an electrical signal.
There are many kinds of knock sensors, such as magnetostrictive detonation sensors, piezoelectric ceramic knock sensors, piezoelectric resonant sensors.


2017年3月23日星期四

Where does the car look like an aerodynamic design?



1, the front of the engine cover down
The purpose is to let the oncoming surface close to the surface smooth climb, reduce wind resistance.

2, face and face at the junction of the edges and corners should be cylindrical
Because the air will be due to the junction of the edges and corners of the separation, the formation of eddy current; to cylindrical design can try to avoid airflow separation.

3, windshield should be "lying flat", and the roof smooth transition china wheel cap
So that the airflow from the engine cover is still close to the surface flow, reducing the stagnation, does not produce shunt.

4, to minimize the headlights and door handles and other prominent, rearview mirror with sleek design

5, under the bumper, you should install the appropriate baffle
Many people may often hear the spoiler, and relatively simple for the baffle. Diversion diversion, as the name suggests is to guide the air flow, so the baffle is generally installed in the front bumper below, conducive to the car ahead of the air lead to the chassis, if the chassis is flat, can play to increase airflow, reduce the pressure at the bottom of the car.

6, the china wheel cap cover should be flat with the tire

7, car back with back or back back design
Streamlined good shape is conducive to reducing air resistance, this needless to say that we all know.


What causes the car to break down?



1, transmission - neutral slip to increase the gearshift mechanism friction
This is very damage to the china transmission, automatic air block when sliding due to the speed and engine speed is different from the hydraulic system in the transmission of hydraulic pressure, damage to the automatic transmission internal friction plate, and ultimately lead to transmission failure, serious Causing an anchor.

2, transmission - gear jump gear, teeth
Cause the cause: automatic wave, brake does not step on the end to hang P file. If the brake did not trampled directly pushed to P block flame, the road is not smooth when the vehicle will move a little, will impact on the gears. Over time, shorten the life of the china transmission.
Manual wave, the clutch does not step on the end of the force will damage the transmission block, so forced to file you will encounter resistance, and this resistance comes from the two fast rotation between the teeth of the friction collision, great damage.

3, fuel pump - line burned, can not give oil
Fuel pump is to rely on the fuel itself to cool, if the oil level is too low oil pump exposed, there may be overheating pump or even burn the line situation. Over time, the car's pump life may be greatly reduced, seriously let you break down in the wild, so do not wait for the fuel warning lights lit before looking for gas stations.

4, the engine - the load is too large, aging intensified
Especially in the summer, it is best to turn off the fire one or two minutes before the first turn off the air conditioning - so, in addition to dry air conditioning outlet, to prevent air conditioning within the breeding bacteria, more importantly, if the air conditioning on the flame, the next time the vehicle starts, the engine With air conditioning load start. The correct way is to start the vehicle two or three minutes after the engine gets lubricated and then open the air conditioner.

5, the frame - deformation loose, the frame does not turn off the door
The problem of the frame is usually because the posture at the time of parking is not standard. Such as riding on the road teeth, will lead to four rounds of excessive, the frame caused by distortion, and even affect the door closed. Long time in the uneven ground on the parking, will cause similar consequences. Steering wheel does not return, but also very hurt the car: will hurt the direction of the rod and dust cover, affecting the steering system.


2017年3月21日星期二

Three places in the car are easily overlooked



The original place: brake / carpet / china instrument panel car three places easily overlooked
A: brake maintenance;
Brakes / rugs / dashboards cars are easily overlooked in three places
Brake system is mainly to check the location of the brake fluid to see if the liquid level within the specified range, as long as the upper and lower limits between the two lines on the line, the low position to add, must be the same type of brake fluid.
Two: carpet cleaning;
Brakes / rugs / dashboards cars are easily overlooked in three places
1, the regular clean up the carpet in the dust and some small debris clean up;
2, regular cleaning, you can use the brush head of the vacuum cleaner for dust treatment. If this is not clean, you can cooperate with a special detergent for cleaning, and finally with a clean cloth to remove the excess detergent can be, and do not completely penetrate the carpet cleaning.
3, a variety of oil cleaning, should immediately wipe with a paper towel, if the wipe is not clean you can use a little vinegar ritual to the oil at the Department, in the wipe, and then wipe the water with a rag can be clean.
Three: china instrument panel cleaning;
Brakes / rugs / dashboards cars are easily overlooked in three places
You can use the table wax for maintenance, a spray, clean, glazing, in its surface to form a layer of bright and clean protective film. Perennial care of car care, especially these inconspicuous place.


How does fuel injector nozzle drying equipment save energy?



The fuel injector nozzle is a multifunctional accessory, and the fuel injector nozzle also plays a role in the drying equipment. On the china fuel injector nozzle drying equipment how to save energy this problem we may not be very understanding, we fuel injector nozzle manufacturers for everyone to say a little bit.

Fuel injector nozzle drying equipment, how to save energy: As the china fuel injector nozzle drying process of energy consumption directly affect the economic efficiency of enterprises and development prospects, then what factors cause fuel injector nozzle drying equipment energy saving it?

china fuel injector nozzle drying equipment, energy saving mainly control the drying medium, into the tower hot air temperature control, the overall control of the closed type, hot air furnace control and other factors affected.

Dry media control: to improve the hot air into the tower temperature in the tower under constant temperature conditions, the hot air into the tower the higher the temperature, the higher the total calories into the unit, the quality of the hot air to the mud droplets of heat More, the unit hot air evaporation of the more water.

Into the tower hot air temperature control: into the tower hot air temperature can not be too high (not more than 600 ℃), the temperature is too high, it will burn the tower top fan. Reduce the hot air out of the tower temperature in the tower hot air temperature is certain circumstances, the lower the hot air tower temperature, drying equipment into the tower temperature difference is greater, the hot air to the mud for drying the greater the heat, so hot air utilization rate The higher the higher.